Cross-Connection and Backflow Prevention
NUTEMP Mechanical Systems are authorized Backflow Prevention and Cross-Connection Control Program agents for the Halton Region. Our fully trained technicians can set up your program including all surveys, drawings, installations and of course testing. So if you have received a letter from your local municipality for either an installation or testing call Nutemp (905) 338-5603 and book your appointment today.
We will complete a full survey and submit this information to Halton in order for your system to be set up, or if you just need an annual inspection we can offer competitive pricing.
What is Backflow?
Water normally flows in one direction from the public water system through the customer's cold or hot water plumbing. If the water begins to flow in the opposite direction, due to back pressure or back siphonage, it can become contaminated from cross-connections. Backflow can occur in any residential, commercial or industrial property.
Backflow from back siphonage is caused by a negative or sub-atmospheric pressure; a drop in the water main pressure. Events that can cause back siphonage include a water main break or a high rate of water withdrawal, such as firefighting.
Backflow from back pressure is caused when the water system is connected to a system or supply operating at a higher pressure than the municipal water system. A booster pump or elevated piping are examples of connections that operate at a higher pressure that cause back pressure.
By installing a backflow prevention device (in properties that have a severe or high hazard of cross-connections), at the point where the water service enters a building or facility, will ensure that Halton's water distribution system is free from contamination.
What is a Cross-Connection?
A cross-connection is a direct or indirect connection between the potable (drinking) water system and any other liquid, gas or other substances.
In a direct link there is a physical connection between the potable (drinking) and non-potable water system, such as an underground sprinkler system or heating and cooling system. In an indirect link the water itself makes the connection, such as a submerged hose or a leaking pipe that "pools" water around the break.
When a backflow occurs, and the water starts to flow in the opposite direction, potential contaminants (e.g. chemical or biological infectious agents) at the point of the cross-connection can be drawn back into the public water system.
Cross-connections between water supplies and sources of contamination represent one of the most significant threats to health in the water supply industry.
We are also authorised agents for: