Cross-Connection and Backflow Prevention
Have you been contacted by the Peel region regarding your Cross-Connection or Backflow system? Then call Nutemp Mechanical Systems, we are an approved agent for Peel.
If you do not have a Cross-Connection system then call Nutemp we will handle all the surveys, drawings and will submit everything to Peel on your behalf. We will also arrange for your annual inspection, making sure that your system is in order and up to code.
What is Backflow?
Water normally flows in one direction from the public water system through the customer's cold or hot water plumbing. If the water begins to flow in the opposite direction, due to back pressure or back siphonage, it can become contaminated from cross-connections. Backflow can occur in any residential, commercial or industrial property.
Backflow from back siphonage is caused by a negative or sub-atmospheric pressure; a drop in the water main pressure. Events that can cause back siphonage include a water main break or a high rate of water withdrawal, such as firefighting.
Backflow from back pressure is caused when the water system is connected to a system or supply operating at a higher pressure than the municipal water system. A booster pump or elevated piping are examples of connections that operate at a higher pressure that cause back pressure.
By installing a backflow prevention device (in properties that have a severe or high hazard of cross-connections), at the point where the water service enters a building or facility, will ensure that Halton's water distribution system is free from contamination.
What is a Cross-Connection?
A cross-connection is a direct or indirect connection between the potable (drinking) water system and any other liquid, gas or other substances.
In a direct link there is a physical connection between the potable (drinking) and non-potable water system, such as an underground sprinkler system or heating and cooling system. In an indirect link the water itself makes the connection, such as a submerged hose or a leaking pipe that "pools" water around the break.
When a backflow occurs, and the water starts to flow in the opposite direction, potential contaminants (e.g. chemical or biological infectious agents) at the point of the cross-connection can be drawn back into the public water system.
Cross-connections between water supplies and sources of contamination represent one of the most significant threats to health in the water supply industry.
We are also authorised agents for: